F35 P re-building table

Anything that doesn't fit into the other Physical Systems categories
Post Reply
User avatar
Camino
Posts: 358
Joined: Fri Oct 28, 2016 4:51 pm
Location: Stockton, CA

F35 P re-building table

Post by Camino »

PO had tried to tighten wood screws into the fold down table top - three legs -- 2 for leaf and 1 for main table -- but screws were stripped. He used larger screws which poked right up through the top side of both leaf and table. Didn't really look great that way with steel glaring at you. I removed the table top and leaf, sanded to bare and re-veneered with new cherry, stained and varnished with satin polyurethane. Results ok :D
Attachments
IMG_1617.jpg
IMG_1617.jpg (9.74 KiB) Viewed 4376 times

User avatar
drcscruggs
Posts: 81
Joined: Tue Apr 03, 2018 3:06 pm
Location: Galveston, Texas

Re: F35 P re-building table

Post by drcscruggs »

Looks good to me. Congratulations

ketch22
Posts: 45
Joined: Fri Dec 05, 2008 5:06 pm
Contact:

Re: F35 P re-building table

Post by ketch22 »

Picture looks great. :D

That was a good project. You didn't have to hang upside down in the engine room, and you get to see the results every time you sit down for food or dink.

tm

User avatar
Camino
Posts: 358
Joined: Fri Oct 28, 2016 4:51 pm
Location: Stockton, CA

Re: F35 P re-building table

Post by Camino »

.....and I could do it all in my home shop! Lol

F32Circle
Posts: 90
Joined: Thu Nov 08, 2012 9:14 am

Re: F35 P re-building table

Post by F32Circle »

Quite beautiful, I’d say!
But I’m curious. What’s that object that’s on the headliner?
Dale
F32 Hull #67, Saybook CT.
Yanmar 3GMF, Loose-footed Main, MaxProp, Ronca, Muir windlass,
Heart Interface inverter/charger, SeaFrost

User avatar
Camino
Posts: 358
Joined: Fri Oct 28, 2016 4:51 pm
Location: Stockton, CA

Re: F35 P re-building table

Post by Camino »

PO had taken out the original overhead circular cabin light and replaced with a nice LED light. It’s in a nice rectangular wooden box frame. There are two of these-one aft- all lights are now LED -you can also see some hanging-sagging overhead headliner. I removed it all when doing the deck work and re hanging was a pita. Mike Cunningham has a good write up of his re-do....mine is ok

Post Reply