Page 1 of 1

F21 spinnaker pole diameter

Posted: Sat Jul 07, 2018 6:51 am
by Jesse
Hi all,

I have seen a few posts about the gun mount rig, but I am still looking for the diameter of the pole on the F21. I have the gun mount but need to make the pole. I measured the inner diameter of the gun mount sleeve at 3.25 inches. I can get aluminum tube stock in 3.25 and 3.00 inch outer diameter. I assume I will need to use 3.00 OD to allow clearance for the pole to slide through the sleeve, but I also don't want a lot of play and I know there is some measurement error in my measurement. Can anyone tell me the outer diameter of their spinnaker pole on the F21? Thanks in advance.

Best wishes
Jesse

Re: F21 spinnaker pole diameter

Posted: Tue Jul 10, 2018 12:13 pm
by hkowalczyk
The OD of the pole is 3 inches. Remember there is a liner in the gunmount that will take up some of that space.

Re: F21 spinnaker pole diameter

Posted: Mon Jul 23, 2018 11:07 am
by Jesse
Thank you so much for the info.
Best wishes
Jesse