F21 spinnaker pole diameter

Post Reply
Jesse
Posts: 12
Joined: Sun Sep 11, 2016 3:56 pm
Location: Buzzards Bay, MA & Montreal, QC

F21 spinnaker pole diameter

Post by Jesse »

Hi all,

I have seen a few posts about the gun mount rig, but I am still looking for the diameter of the pole on the F21. I have the gun mount but need to make the pole. I measured the inner diameter of the gun mount sleeve at 3.25 inches. I can get aluminum tube stock in 3.25 and 3.00 inch outer diameter. I assume I will need to use 3.00 OD to allow clearance for the pole to slide through the sleeve, but I also don't want a lot of play and I know there is some measurement error in my measurement. Can anyone tell me the outer diameter of their spinnaker pole on the F21? Thanks in advance.

Best wishes
Jesse

hkowalczyk
Posts: 42
Joined: Sat Sep 04, 2010 1:55 am

Re: F21 spinnaker pole diameter

Post by hkowalczyk »

The OD of the pole is 3 inches. Remember there is a liner in the gunmount that will take up some of that space.

Jesse
Posts: 12
Joined: Sun Sep 11, 2016 3:56 pm
Location: Buzzards Bay, MA & Montreal, QC

Re: F21 spinnaker pole diameter

Post by Jesse »

Thank you so much for the info.
Best wishes
Jesse

Post Reply