What size stands for a Hoyt 32?

Anything that doesn't fit into the other Physical Systems categories

What size stands for a Hoyt 32?

Postby Drew_Sea » Tue Sep 04, 2018 7:44 am

Hello everyone,

I am in need to purchase boat stands for my Hoyt 32 (6ft draft version). What is the proper size stands for this boat?

According to Brownell, the suggested size is up to 96"! This is definitely far larger than the stands she was on when I purchased her.

For sale locally there are some used 48" to 65" stands. These seem like they may be too small, but at less than half price of new it's worth mentioning.
Drew_Sea
 
Posts: 6
Joined: Fri May 18, 2018 2:09 pm

Re: What size stands for a Hoyt 32?

Postby bad » Tue Sep 04, 2018 10:52 am

It would be unusual to support the boat above the waterline, so 6ft plu whatever height your keel is supported above the ground should be max. Also, they usually don't bear to much weight - normally the boat rests on the keel and the stands keep her from tipping.
bad
 
Posts: 120
Joined: Sat Jul 09, 2011 11:14 am

Re: What size stands for a Hoyt 32?

Postby JohnReinagel » Tue Sep 04, 2018 12:04 pm

Last year I purchased (4) 35-52" stands for the mid and stern sections. With a single 4x4 block under the keel these are just tall enough to work, although I wish I would have gone the next size up.

For the bow I purchased used from a friend but don't recall their height, they are considerably taller of course. (No help here, sorry)
John


1984 Hoyt F32
Hull #53
User avatar
JohnReinagel
 
Posts: 44
Joined: Mon May 08, 2017 1:44 pm
Location: Suburb of Buffalo, N.Y.

Re: What size stands for a Hoyt 32?

Postby Drew_Sea » Thu Sep 06, 2018 2:40 pm

Appreciate the information.

John, just to confirm, you have the deep keel version?

If that's the case, I should jump on at least 4 of those 65" stands!
Drew_Sea
 
Posts: 6
Joined: Fri May 18, 2018 2:09 pm

Re: What size stands for a Hoyt 32?

Postby JohnReinagel » Thu Sep 06, 2018 4:39 pm

Drew, man I'm happy you asked that, no, I have the shoal draft at 4' 11".
John


1984 Hoyt F32
Hull #53
User avatar
JohnReinagel
 
Posts: 44
Joined: Mon May 08, 2017 1:44 pm
Location: Suburb of Buffalo, N.Y.

Re: What size stands for a Hoyt 32?

Postby Grimsby_Alan » Sun Oct 07, 2018 8:21 am

I have attached a photo of the stands my boat was on last winter. Hopefully you can gauge the height of the stands by comparing them to the boat. She has the long keel as you can see.
Hope this helps.
A3E2AA8A-0AD1-44C7-A34D-341E671BD613.jpeg
A3E2AA8A-0AD1-44C7-A34D-341E671BD613.jpeg (93.62 KiB) Viewed 290 times
Grimsby_Alan
 
Posts: 28
Joined: Wed Oct 26, 2016 12:42 pm

Re: What size stands for a Hoyt 32?

Postby Grimsby_Alan » Mon Oct 08, 2018 7:47 am

Here’s an alternate view. They are getting cropped by the site. Hopefully you can see enough to figure it out. If not PM me your email and I’ll send them direct.
Attachments
0F7FD994-2656-44DB-94B8-427609A1BD77.jpeg
0F7FD994-2656-44DB-94B8-427609A1BD77.jpeg (30.6 KiB) Viewed 174 times
Grimsby_Alan
 
Posts: 28
Joined: Wed Oct 26, 2016 12:42 pm


Return to Everything Else

Who is online

Users browsing this forum: No registered users and 0 guests