FreedomYachts.org

I haven’t pulled mine yet but i believe on the 32’s at least the widows sit proud of the fibreglass. There would be no difference it the levels. It’s a nice clean look. What adhesive was used to attach the glass?

That looks like the topping lift would interfere with the angle of the camber spar. I have it rigged to the smaller loop and the sheet attached at the longer loop. The pull of the sheet forces the spar to roll to the best angle.

I’m doing this from memory so bear with me. The sheet goes from the top of the spring up to the block on the end of the camber spar then back down to the block at deck level through the deck organizer and back to the cockpit.
Hope that helps.

Next time I’m at the boat i will check for size and thread count.

Unfortunately no. They look pretty slick though. Hopefully someone will know.

Scuppers. I have the same on my F32.

This is from overhead with the bow at bottom of pic. The two lines show where the bolt holes are located.

My boat does not have a “L” bracket. There are two bolt holes in the top hat and there are two matching holes through the base of the mast. Hope this helps. Sadly i don’t have a side view photo of the holes and currently we’re not allowed in the boat yard due to the quarantine.

Is anyone familiar with the brackets on the pushpit in the attached photo?

I had a chance to speak with the breaker who has the F25 mast. He says that it is in great condition. Again, if anyone is interested, drop me a p.m.