Search found 92 matches

by andygc
Sun Sep 29, 2019 2:56 am
Forum: Engines and Mechanical Systems
Topic: engine sizing for an F28 ck Hoyt
Replies: 13
Views: 9103

Re: engine sizing for an F28 ck Hoyt

First, where did you get 3 tonnes from? Feronia weighs just over 5 tonnes on the crane with a full fuel tank, empty water tank, catering equipment, rubber dinghy, warps, fenders, a couple of bottles of wine, part bottles of gin and whisky, a few beers, bedding and some clothing. The engine is a Beta...
by andygc
Mon Sep 16, 2019 4:52 pm
Forum: Engines and Mechanical Systems
Topic: F30 CK Centreboard movement
Replies: 5
Views: 4598

Re: F30 CK Centreboard movement

The F30 bearing is easier to get at than the F35 bearing. The yoke is held by bolts only - there is no pin to remove before lowering, so no lifting needed. The only difficulty might be the degree of violence needed to persuade the yoke to descend - we had to use a club hammer and a block of wood on ...
by andygc
Fri Jun 14, 2019 5:53 am
Forum: Rigging and Sails
Topic: F32 reefing
Replies: 9
Views: 6457

Re: F32 reefing

Absolutely no offence taken. I'm sorry, but it is difficult to see what part of the sail that is. You should not need to crop photos, but you do need to resize them (reduce the resolution). There are instructions about that on the forum.
by andygc
Thu Jun 13, 2019 6:02 am
Forum: Rigging and Sails
Topic: F32 reefing
Replies: 9
Views: 6457

Re: F32 reefing

They look like the holes for the leech line. It's normal to bring the leech line out to a small jamming cleat which would be mounted between those two holes. But they wouldn't usually go right through the sail and you don't appear to have a leech line.
by andygc
Wed Jun 05, 2019 6:14 am
Forum: Rigging and Sails
Topic: Adjustable boom choker on a CK; is it really necessary?
Replies: 6
Views: 6251

Re: Adjustable boom choker on a CK; is it really necessary?

The original setup on the 28/30 CK, as far as I can make out, was just a length of 12mm rope round the mast with a loop tied in the middle. The loop provides the attachment for the boom halyard, limit strop and reefing tackle. I've gone for the slightly posher addition of a stainless steel ring hitc...
by andygc
Sat Jun 01, 2019 5:28 am
Forum: Plumbing
Topic: Manual bilge pump
Replies: 9
Views: 8560

Re: Manual bilge pump

Do you have any photographs of your pump? The range of manual pumps is shown here: https://www.whalepumps.com/marine/product-application-items.aspx?Category_ID=10009&FriendlyID=Manual-bilge-pumps I don't think Whale has changed the design of any of their traditional manual pumps - the Mk5 and the Gu...
by andygc
Fri May 31, 2019 10:16 am
Forum: Plumbing
Topic: Manual bilge pump
Replies: 9
Views: 8560

Re: Manual bilge pump

Which Whale pump? Whale has a range of spares kits, so I'd be surprised if you couldn't refurbish it.
by andygc
Fri May 31, 2019 5:24 am
Forum: Rigging and Sails
Topic: 28 CK Halyard Sizing?
Replies: 2
Views: 2767

Re: 28 CK Halyard Sizing?

If you have the original rig - a single halyard hoisting a double halyard - the sizes are here:
http://www.freedomyachts.org/viewtopic. ... 051#p49913
by andygc
Fri Apr 12, 2019 7:50 am
Forum: Electrical and Electronics
Topic: depth and speed sensor question
Replies: 7
Views: 8345

Re: depth and speed sensor question

If you can obtain the correct log impeller unit you should have no worries about inserting it afloat. I've removed a log impeller on many occasions to clear weed - that's why they are made removable afloat. The water pressure is trivial - a 2 or 3 foot head - which you can easily hold back with the ...
by andygc
Mon Apr 08, 2019 12:35 pm
Forum: Everything Else
Topic: storm sail on a F30 CK?
Replies: 17
Views: 13640

Re: storm sail on a F30 CK?

My storm staysail is original equipment. It may have been used by the first owner, but not since.
Luff 5.35m 17' 7"
Leech 4.35m 14' 3"
Foot 2.14m 7' 0"

That leech measurement is the straight line. There's a fair degree of negative roach.
storm staysail-1.jpg
storm staysail-1.jpg (142.12 KiB) Viewed 6065 times