This file contains the rigging specs for the 40/40.
-- Geoff
Freedom 40/40 Rigging List
- GeoffSchultz
- Posts: 1135
- Joined: Thu Dec 04, 2008 8:39 am
- Location: BlueJacket: Guatemala
- Contact:
Freedom 40/40 Rigging List
- Attachments
-
- 4040_Rigging_List.pdf
- (47.62 KiB) Downloaded 851 times
-
- Posts: 25
- Joined: Wed May 20, 2009 4:42 pm
- Location: Stonington, CT
Re: Freedom 40/40 Rigging List
Geoff, this rigging list should come in handy. I see that it's the original list for your boat, as delivered, right? Can you tell me anthing about the configuration, at the time? What was the mast height, and were the halyards led to the cockpit? I just ordered a spare main halyard sized at 152' (Endura 7/16 braid), even though I just reduced the mast to 61.5" AWL, whereas your list only calls for 132'
- GeoffSchultz
- Posts: 1135
- Joined: Thu Dec 04, 2008 8:39 am
- Location: BlueJacket: Guatemala
- Contact:
Re: Freedom 40/40 Rigging List
Yes, this is the original list that was loose in my manual. This is hull 25, circa 1997, with a 62' mast. All lines run to the cockpit. I'd add 10+' to the jib halyard as I tend to chafe through it and keep shortening it.DaysailorJ wrote:Geoff, this rigging list should come in handy. I see that it's the original list for your boat, as delivered, right? Can you tell me anthing about the configuration, at the time? What was the mast height, and were the halyards led to the cockpit? I just ordered a spare main halyard sized at 152' (Endura 7/16 braid), even though I just reduced the mast to 61.5" AWL, whereas your list only calls for 132'
-- Geoff
Re: Freedom 40/40 Rigging List
Thank you Geoff!